Russiα finally launched the Giant Nauka science module to the International Space Station after years of delay
Nauka is Russiα’s biggest International Space Station room yet.
Russiα’s largest space laboratory yet launched into orbit Wednesday (July 21) on a mission to expand the International Space Station after 14 years of delays.
The Russiαn Multipurpose Research Module (MLM), also known as Nauka, blasted off toward the International Space Station at 10:58 EDT (14:58 UTC) atop a Proton-M rocket from Russiα’s Baikonur Cosmodrome in Kazakhstan.
The launch was a longtime coming for Nauka, which was originally slated to launch in 2007.
“Engine start and lift-off. A module named Science takes flight to the International Space Station!” NASA commentator Rob Navias said just as the rocket lifted off the launch pad, sending the 22-ton (20-tonne) Nauka module toward the space station.
The Proton-M rocket with the Russiαn Nauka module aboard blasting off Russiα’s Baikonur Cosmodrome in Kazakhstan. (Image credit: Roscosmos)
The module, carrying the European Robotic Arm (ERA), a new robotic appendage designed to service the Russiαn segment of the space station, successfully separated from the launcher 580 seconds after liftoff.
“T+9:40 min after the liftoff, the Nauka Multipurpose Laboratory Module separated nominally from the Proton-M carrier rocket 3rd stage!” Russiα’s Space Agency Roscosmos confirmed the successful separation in a tweet that was later taken offline. “It is now beginning its 8-day autonomous flight to the ISS.”
Three minutes later, Roscosmos confirmed Nauka successfully deployed its solar panels and antennas.
The module will now use its own engines to raise its orbit, the Russiαn news agency TASS reported(opens in new tab).
The Nauka module before its encapsulation into a rocket fairing. (Image credit: Roscosmos)
Nauka, which is expected to dock at the orbital outpost on July 29, will become the largest Russiαn component of the station.
Over 42 feet (13 meters) long and with a maximum diameter of 14 feet (4.3 meters), the module will house research facilities but also provide a spare bed for a cosmonaut, as well as a toilet, oxygen regeneration system and gear for recycling water from urine.
Before Nauka reaches the space station, cosmonauts will have to remove the Pirs docking module on the station’s Russiαn-built Zvezda service module to allow Nauka to take its place.
That undocking is scheduled for 9:17 a.m. EDT (1317 GMT) on Friday (July 23) and you’ll be able to watch that live courtesy of NASA TV.
Cosmonauts started preparing for the departure of Pirs last month during a series of spacewalks.
Pirs is departing the space station after nearly 20 years serving as a docking port and airlock for the orbiting laboratory.
It will partially burn in the atmosphere but pieces from it will land in the Pacific Ocean approximately four hours after its departure from the space station, according to TASS(opens in new tab).
Nauka, conceived in the early 1990s, experienced many obstacles on its way to space.
Originally designed as a back-up for the station’s first module, Zarya, which launched in 1998, Nauka spent over two decades waiting on the ground, getting outdated.
In 2013, the Khrunichev Space Center, which built Nauka, had to remove metal chips found in the module’s fuel system, TASS reported.
At some point, Roscosmos contemplated replacing the research module’s ageing propellant tanks with those from the Fregat booster.
However, later it was decided to send the module to the space station with its original tanks.
Nauka also features an active docking port and an airlock, which will be serviced by the 36-foot-long (11m) European Robotic Arm, the first robotic operator designed specifically to work on the Russiαn segment of the space station.